Industrial high-pressure twin-piston air compressor 500 L AirPro500W-Twin
Professional high-pressure air compressor featuring a 500 L tank and dual 5.5 kW motors. Delivers up to 12.5 bar working pressure with an 890 L/min nominal output. Designed for heavy-duty industrial applications, commercial vehicle servicing, and demanding pneumatic tools.
Reduced price:
€1,306.80
Tax included
Industrial High-Pressure Twin-Piston Air Compressor
A professional high-pressure air compressor designed for demanding industrial and workshop environments where pressure requirements exceed the standard 8 bar range. Equipped with two W-0.67/12.5 cast-iron compressor blocks and dual 5.5 kW (7.5 HP) motors, it delivers stable operation up to 12.5 bar with a total nominal output of approximately 890 L/min.
Key Features
- High-pressure design – automatic stop at 12.5 bar and restart at ≈ 10.5 bar
- Two 5.5 kW motors – total 11 kW combined output
- 500 L horizontal tank – CE-certified, pressure-tested at 16 bar
- Heavy-duty W-0.67/12.5 cast-iron blocks for increased pressure capability
- Metal air filters for long-term durability and clean air intake
- Pressure regulator and quick coupling included
- Independent motor control – run one or both motors as needed
- Pre-wired D.O.L. starters (QCX5-22-5.5 kW each)
- CE marking for EU market compliance
- Delivered on a wooden pallet base for easy transport with a hand pallet truck
Technical Specifications
| Model | AirPro500W-Twin |
| Tank volume | 500 L (horizontal) |
| Compressor type | 2 × W-0.67/12.5 cast-iron blocks |
| Nominal air displacement | 2 × 445 L/min ≈ 890 L/min (total) |
| Approx. free air delivery @ 10 bar | ≈ 600 – 650 L/min (total) |
| Working pressure range | 12.5 bar |
| Tank test pressure | 16 bar (not adjustable) |
| Motor power | 2 × 5.5 kW / 7.5 HP |
| Voltage / Phase / Frequency | 400 V / 3 Ph / 50 Hz |
| Amperage | 2 × 11.1 A |
| Start type | D.O.L. Starter QCX5-22-5.5 kW |
| Noise level | ≈ 83 dB(A) |
| Protection class | IP44, Class B |
| Air filters | 2 × metal type |
| Quick coupling | 1 × fast connection outlet |
| Power cable | 1.5 m with 400 V plug (16 A 5-pin) |
| Net / Gross weight | ≈ 340 kg / ≈ 390 kg |
| Dimensions (L × W × H) | ≈ 1900 × 600 × 1150 mm |
Air Delivery Performance
The following values show nominal displacement and estimated effective air delivery during typical operation (10.5 – 12.5 bar range):
| Parameter | Per pump | Total (Twin) |
|---|---|---|
| Nominal displacement (0 – 12.5 bar average) | ≈ 445 L/min | ≈ 890 L/min |
| Approx. real free air delivery @ 10 bar | ≈ 300 – 325 L/min | ≈ 600 – 650 L/min |
| Working pressure range | 10.5 – 12.5 bar (auto on/off) | |
| Tank test pressure | 16 bar (not adjustable) |
Ideal Applications
- Industrial equipment and machinery requiring 10 – 12 bar air pressure
- Commercial vehicle tyre service and agricultural machinery workshops
- Sandblasting, powder coating and metal surface preparation
- Heavy-duty pneumatic tools and continuous-duty stations
- Professional applications where the standard 8 bar is not sufficient
Advantages of High-Pressure Twin Design
- Automatic pressure control – starts at 10.5 bar, stops at 12.5 bar
- Higher compression ratio – optimised for 12.5 bar output
- Two independent motors – flexible operation and redundancy
- Durable cast-iron blocks – low RPM and long service life
- Fast 500 L tank refill even at high pressure levels
Recommended Accessories
- High-pressure air dryer (rated for 12.5 bar)
- 3-stage moisture and oil separator set
- Automatic condensate drain system
- Oil and filter service kit (every 500 h)
- Safety valve and regulator inspection (annually)






















